At present, the company has successfully developed and produced more than 10 kinds of boron-containing steel varieties such as 35MnBM, 23MnBM, ABS E40 hull structural steel, 27MnTiB, 40MnB, 25CrMoTi, etc. According to the practice of Laiwu Steel's 50t electric arc furnace-50t LF-60t VD-R11 Lianzhuo-VD Royal alloying process development and production of boron-containing steel, the technical measures for precise control of the smelting of boron-containing steel are analyzed and discussed.
ABS E40 hull structural steel, Q345B low alloy plate performance: 1) High strength: Generally its yield strength is above 300MPa; 2) High toughness: The elongation is required to be 15% to 20%, and the room temperature impact toughness is greater than 600kJ/m to 800kJ/m. For large welded components, higher fracture toughness is also required; 3) Good welding performance and cold forming performance; 4) Low cold brittle transition temperature; 5) Good corrosion resistance.
Quenching is a common heat treatment process. It is the metal heat treatment process in which the ABS E40 hull structural steel metal workpiece is heated to a proper temperature and kept for a period of time, then immersed in the quenching medium for rapid cooling. Quenching can improve the strength and hardness of steel in a large range, and adjust the coordination between ABS E40 hull structural steel strength and hardness, plasticity and toughness. Quenching is generally used as the final heat treatment.
SG255 gas cylinder ABS E40 hull structural steel steel is widely used in petroleum, chemical industry, power station, boiler, etc, used to make the reactor, heat exchanger, separator. The company is a professional gas cylinder steel exporter and a steel stockist in china. We keep more than 1000 tons SG255 gas cylinder steel coils in ABS E40 hull structural steel stock every month. If you want to get the steel price, please do not hesitate to contact us. Any need in SG255 Chemical Composition and Mechanical Properties, please feel free to contact us by email or calling to us.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
Leave a Message