Our company attaches great importance to technical support and after-sales service, and has established a customer service center to provide unified technical support and service for 100mm GL-A40 quenched and tempered steel various engineering projects. Customer service center has a strong technical force of technical service team, composed of a customer service center manager, several 100mm GL-A40 quenched and tempered steel after-sales service personnel, responsible for unified acceptance and processing of local after-sales service needs.
45# steel is commonly used medium carbon quenched and tempered structural steel. The steel 100mm GL-A40 quenched and tempered steel is generally cold plastic, annealing and normalizing are slightly better than quenching and tempering, with higher strength and better machinability. After proper heat treatment, 45# carbon steel can certain toughness, plasticity and wear resistance can be obtained. 45# steel normalizing can improve the cutting performance of roughness less than 160HBS.
Mechanical properties of 45# steel high-quality carbon structural steel: Tensile strength σb (MPa): ≥600, yield strength σs (MPa): ≥355, elongation δ5 (%): ≥16, section shrinkage ψ (%): ≥40, impact energy Akv (J): ≥39. 45# steel impact toughness value αkv (J / cm2): ≥49 (5), hardness: unheated, ≤229HB; annealed steel, ≤197HB. 100mm GL-A40 quenched and tempered steel, 45# steel chemical composition % (Carbon: 0.42 to 0.50, Silicon: ≤0.40, Manganese: 0.50 to 0.80, Sulfur: ≤0.045, Phosphorus: ≤0.045, Chromium: ≤0.40, Nickel: ≤0.40, Molybdenum: ≤0.10).
After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.
Leave a Message