VL E460 steel: is a structural steel plate for ships and offshore engineering."VL" stands for the abbreviation of "DNVGL", which is a standard certified by the two classification societies of DNV (Norway) and GL (Germany). The yield strength is 460. Different classification society certifications, different grade requirements and different yield strengths can be selected according to different needs.
The outer diameter of the hot-rolled seamless pipe is generally larger than 32mm, and the wall thickness is 2.5-75mm. The diameter of the cold-rolled seamless pipe can be 6mm, the wall thickness can be 0.25mm, the outer diameter of the thin-walled pipe can be 5mm, and the wall thickness is less than 0.25mm. The size accuracy of the cold-rolled seamless pipe is higher than that of the hot-rolled seamless pipe, BV FH36 offshore structural steel plate.
South Korean BV FH36 offshore structural steel plate steel industry said that the slowdown in economic growth superimposed on the impact of the epidemic, steel demand weakened, exports were sluggish, enterprises are facing huge operating pressure. Due to the delay in the resumption of work of Chinese BV FH36 offshore structural steel plate steel enterprises, the steel inventory is growing rapidly. According to statistics, China's steel circulation inventory reached 23.75 million tons in February, the highest since 2006, with an estimated total inventory of 33.45 million tons.
The effect of nitrogen (N) on the properties of BV FH36 offshore structural steel plate and so on steel is similar to that of carbon and phosphorus. With the increase of nitrogen content, the strength of steel can be significantly improved, especially the plasticity, especially toughness, and the weldability will be decreased, and the cold brittleness will be intensified. At the same time, aging tendency, cold brittleness and hot brittleness will be increased, which will damage the weldability and cold bending property of steel. Therefore, the nitrogen content in BV FH36 offshore structural steel plate and so on steel should be reduced and limited as much as possible. Generally, nitrogen content should not be higher than 0.018%.
Leave a Message