What are the factors affect KA 32 crane vessel steel weight

Is carbon steel 20#? Carbon steel means that alloy elements are not specially added into the steel, which is divided into ordinary carbon structural steel and high-quality carbon structural steel. The grades of ordinary carbon structural steel are Q195, Q215, Q235 and Q275. The grades of high quality carbon structural steels are: 10#, 20#, 45#, 15Mn, 20Mn, 25Mn, 30Mn, 35Mn, 40Mn, 45Mn, 65Mn, etc. It can be seen that KA 32 crane vessel steel, 20# steel is carbon steel, but carbon steel means more than 20# steel.

40Cr steel belongs to alloy structural steel. KA 32 crane vessel steel, 40Cr steel has good comprehensive properties, low temperature impact toughness and low notch sensitivity after quenching and tempering on the basis of high-quality carbon structural steel No. 40. 40Cr steel mechanical properties: tensile strength: ≥ 980mpa, yield strength: ≥ 785MPa, elongation after fracture: ≥ 9%, elongation after fracture: ≥ 45%, impact absorption energy: ≥ 47J. 40Cr steel chemical composition: C: 0.37-0.44, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.80-1.10.

For stainless steel plate cutting, the choice of cutting method is determined by the thickness of steel plate. If the thickness of KA 32 crane vessel steel stainless steel plate is more than 20 mm, flame cutting is adopted, while the thin plate is suitable for plasma cutting. In addition, if the cutting requirements are relatively high, laser cutting can be used. In addition, if the KA 32 crane vessel steel stainless steel plate is used as a billboard, plasma cutting is adopted, Because it uses thin plates.

Since its establishment, the company has participated in several key railway and highway projects. After years of development, the company’s KA 32 crane vessel steel domestic market has been exported to more than a dozen provinces and cities including Kunming, Shenzhen, Hunan, Sichuan, Shanghai, Nanjing, Heihe, Jilin, Inner Mongolia, and Xinjiang . International trade is exported to Kazakhstan, South Korea, Vietnam, South Africa and many other countries, and has been well received by customers.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.