The company will also put Georgetown steelworks on "care and maintenance mode" and temporarily lay off or redeploy about 130 employees working at the steelworks and contractors while some quenched and tempered GL-E40 hull steel plate maintenance employees will be on staff during the closure. It is stated that unemployment insurance and state-based unemployment support will be available immediately to workers affected by these changes.
When talking about our team, it is hard not to mention our QC department (Quality Control). We have built strict qualitycontrol system to guarantee the steel quality. During the steel materials production, we have strict monitoring measures and indicators, and ensure no chemical composition, mechnical properties and so on technical problems for the steel materials quenched and tempered GL-E40 hull steel plate. After production, our QC department will conduct another inspection regarding to the steel quantity, dimension, mark and so on points before delivery.
The specifications available for quenched and tempered GL-E40 hull steel plate, pressure vessel plates are: thickness 8-700mm, width 1500-4200mm, length 4000-17000mm, and unit weight up to 30.00 tons. Our company can provide cutting, welding, drilling and turning services if required. Available flaw detection requirements: Z15-Z35 thickness direction performance requirements, high strength and toughness requirements, pressure vessel plate and other steel plates.
13CrMo4-5 seamless pipe is a kind of pressure resistant seamless pipe in accordance with the European standard EN 10216-2. The chemical composition of 13CrMo4-5 seamless pipe is C 0.10-0.17, Si ≤ 0.35, Mn 0.40-0.70, P ≤ 0.025, S ≤ 0.020, Cr 0.70-1.15, Ni ≤ 0.30, Mo 0.40-0.60, Al ≤ 0.04, Cu ≤ 0.03. Mechanical properties of 13CrMo4-5 seamless pipe: tensile strength: 440-590 MPa, yield strength: ≥ 290 MPa, elongation: ≥ 22%, impact energy: ≥ 40J. quenched and tempered GL-E40 hull steel plate, 13CrMo4-5 seamless pipe is used in petroleum, chemical industry, power station, boiler and so on industries.
The Egypt customer ordered 130 tons quenched and tempered GL-E40 hull steel plate stainless steel plate in stock, and this batch has left port today for its destination today(October 25th, 2019). 316l stainless steel is molybdenum-bearing austenitic stainless steel. This material has better corrosion resistant property than 304/314L for it's higher Ni and Mo content. (it is considered to be marine grade stainless steel, not suitable for warm sea water treatment). 316L austenitic stainless steel supplied by our company has good formability and weldablity, additionally it is proved to have excellent properties of tensile, creep and stress-rupture strengths in elevated temperature environment.
If you are in the search of best quality of quenched and tempered GL-E40 hull steel plate structural steel plate then you have landed on the right place. These high quality structural steel plates are used for a long time as they have a long life due to their best and advance manufacturing techniques. These quenched and tempered GL-E40 hull steel plate plates are best and ideal for temperature rise work, high pressure and tank fabrication work where accurate & excellent toughness is required for better results. Welcome to our factory. We supply our products to all the leading industries and customers who are satisfied with our production and quality.
Leave a Message