The company has GL-A36 Ro-Ro ship steel plate advanced production equipment and machining technology, excellent marketing team and domestic regional channel partners, and sound management plan for product market development and after-sales service. After years of cooperation experience GL-A36 Ro-Ro ship steel plate, we have accumulated a large number of customers at home and abroad, and won unanimous praise.
Carbon steel GL-A36 Ro-Ro ship steel plate is an iron carbon alloy with carbon content less than 2.11% and a small amount of silicon, manganese, sulfur, phosphorus and other impurities. Carbon steel inevitably contains some impurity elements during smelting, which has a great influence on the performance and quality of steel, so it should be controlled. The quality of carbon steel is mainly measured by the content of sulfur and phosphorus. The lower the GL-A36 Ro-Ro ship steel plate content of sulfur and phosphorus, the better the quality of carbon steel.
Ordinary carbon steel killed steel plate deoxidizes the liquid steel before making. When the liquid steel is poured into the ingot, its reaction is relatively calm and there is no boiling state. Advantages: this kind of steel plate GL-A36 Ro-Ro ship steel plate has no gas, less impurities, uniform stress and good welding performance. Widely used in demanding parts
S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the GL-A36 Ro-Ro ship steel plate rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of GL-A36 Ro-Ro ship steel plate steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.
Mechanical Properties A242 steel:ASTM A242 specification is made for low alloy steel with high strength, it has good atmospheric corrosion resistance, some applications has shown that it has better corrosion resistance than ASTM A36 steel and ASTM A572 Grade 50.Tensile: 70 ksi min (3/4 and under), 67 ksi min (3/4-1.5) 63 ksi min (over 1.5-4)Yield: 50 ksi min (3/4 and under), 46 ksi min (3/4-1.5) 42 ksi min (over 1.5-4)Elongation: 16% min in 8” 19% min in 2” (for plates wider than 24”)
Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.
Leave a Message