Focusing on the energy conservation and emission reduction objectives proposed by the municipal government, the company gives full play to the advantages of circular economy formed after the comprehensive completion and operation, and vigorously promotes the implementation of energy conservation objectives Through measures such as energy saving, technological innovation and management strengthening, the energy saving target of annual reduction of added value energy consumption by 7% It has made great contribution to energy saving of over completion,shipbuilding material KE MS steel plate.
Our company supply the cold rolled steel coil for customers, and the cold rolled steel coil we produce the standard of JIS, EN, DIN. The available grades include the JIS G 3141 SPCC, SPCD, SPCE, shipbuilding material KE MS steel plate and so on. The EN 10111 standard include DD11, DD12, DD13, DD14. The EN 10130 standard include DC01, DC03, DC04 etc. The standard of DIN 1623 available grades have ST12, US113, RRST13 and ST14.
If a destructive accident occurs during the use of the boiler, it will cause serious losses. Therefore, other than some common strengths with , the boiler steel plate must have good physical properties, mechanical properties and workability, and be strictly specified in the technical terms of the material standard to meet its safety in use. High temperature (above creep temperature) boiler steel plates are generally low-alloy heat-resistant steels, such as chromium molybdenum steel, chromium molybdenum vanadium steel, chromium molybdenum tungsten steel, etc.
Shipbuilding material KE MS steel plate,As the thickness and hardness of increase, the tendency to crack at the cutting edge increases. In order to prevent the shipbuilding material KE MS steel plate from cutting cracks, preheating should be carried out before cutting. Special attention should be paid to preheating to make the entire shipbuilding material KE MS steel plate interface evenly heated to avoid local overheating in the area contacting the heat source. If the whole cannot be preheated, the partial preheating method can be used instead.
Shipbuilding material KE MS steel plate,P355GH steel yield strength in different thickness has different values.Thickness 8-16mm: 355MPa min., ＞16-40mm: 345MPa min., ＞40-60mm: 335MPa min., ＞60-100mm: 315MPa min., ＞100-150mm: 295MPa min., ＞150-250mm: 280MPa min. The elongation minimum is 20%. P355GH plate under EN10028-2:2003 standard is a pressure vessel steel. It is always delivered in hot rolling, controlled rolling, normalizing.
Shipbuilding material KE MS steel plate,After-sales service team is a key department to test the steel quality. Product quality is always the foundation of our survival and development. The company's full inspection from raw materials to finished products; and implements standardized, scientific, and strict internal quality control and management systems in accordance with the process flow during the production process; products can only leave the factory if qualified, and follow-up problem solving systems are implemented in after-sales services to guarantee the customers’ interest.
Leave a Message