Rolling size of KF36 offshore engineering steel

KF36 offshore engineering steel,Our company was founded in 2000, which initially committed to providing high-quality steel products for China's rapid infrastructure construction. With the advantages of steel resources and good reputation in the domestic market, combined with the huge demand for steel in the international market, we began to export steel to the international market, opening up the international steel market.

KF36 offshore engineering steel,EN10025-2 S355JR low alloy steel grade is equivalent to GB Q345B in Chinese standard. For the normal thickness, these two steel grades are both owned 345MPa yield strength. Plate S355JR+N indicates that the S355JR steel plate must be done Normalized heat treatment when rolling for improve the steel strength and weldability. Our mill would roll , S355JR alloy steel plate under as rolled or control rolled when customers' have not requested any heat treatment in their P/O.

Compared with carbon steel, low alloy steel has many advantages, such as high strength, good plasticity and toughness, good weldability, good cold and hot pressure processing performance, better corrosion resistance, etc. Due to the increase of KF36 offshore engineering steel metal composition, the yield point of low alloy steel structure is higher than that of ordinary carbon steel, so it is light and suitable for structural parts application. The low alloy steel is one of our main products.
KF36 offshore engineering steel

KF36 offshore engineering steel,S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.
As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

ASTM A131 shipbuilding steel has different grade levels. The ordinary strength shipbuilding steel grades are grade A/B/D/E. Their min. yield strength is 235 Mpa, and tensile strength is 400-520 Mpa. The higher strength shipbuilding steel grades are grade AH32/DH32/EH32/FH32, AH36/DH36/EH36/FH36 AH40/DH40/EH40/FH40. The min. yield strength of AH32/DH32/EH32/FH32 steel is 315 Mpa, and tensile strength is 440-590 Mpa. The min. yield strength of AH36/DH36/EH36/FH36 steel is 355 Mpa, and tensile strength is 490-620 Mpa. The min. yield strength of AH40/DH40/EH40/FH40 steel is 390 Mpa, and tensile strength is 510-650 Mpa.
KF36 offshore engineering steel

KF36 offshore engineering steel,After-sales service is an important part of measuring a product good or not. After sales service can't be ignored. Good service can really make consumers feel relieved. We have always done a good job in after-sales service, so as to bring consumers a better reference when purchasing and a better experience during use of our steel materials. We will call back and follow up the performance of our steel products regularly.