Standing at a new historical starting point, we adapt to the requirements of supply side structural reform, adhere to the overall strategy of "innovation driven, quality leading, RINA DH32 watertight bulkhead steel quality improving and efficiency increasing, transformation and development", and constantly improve the development concept and development level with a forward-looking vision and grand vision. Now we have been ranked the RINA DH32 watertight bulkhead steel International leading steel materials supplier.
Generally, the production process of RINA DH32 watertight bulkhead steel seamless steel tube can be divided into cold rolling and hot rolling. The production process of cold-rolled seamless steel tube is generally more complicated than that of hot rolling. The tube blank must be first rolled by three rolls, and then be subject to sizing test and cutting after extrusion. Then enter the annealing process. In appearance, the cold-rolled seamless steel tube is shorter than the hot-rolled seamless steel tube, and the wall thickness of the cold-rolled seamless steel tube is generally smaller than that of the hot-rolled seamless steel tube, but the surface looks brighter than the thick wall seamless steel tube, the surface is not too rough, and the diameter is not too much burr.
EN10083-3 42CrMo4 steel plate delivery status: Heat treatment (normalizing, annealing or high temperature tempering) or non-heat treatment delivery status should be specified in the contract. EN10083-3 42CrMo4 steel plate equivalent materials: JIS SCM440, AISI 4140, GB 42CrMo, RINA DH32 watertight bulkhead steel etc. EN10083-3 42CrMo4 steel plate has high intensity, high hardenability, high fatigue strength and good low-temperature impact toughness.
Preheating cutting: The most effective way to prevent steel plate cutting cracks is to preheat before cutting. Before flame cutting, the steel plate is usually preheated, and the preheating temperature mainly depends on the quality level and thickness of the steel plate. The preheating method can be carried out with flame burner, electronic heating pad, or heating furnace. In order to determine the preheating effect of the steel plate, the required temperature should be tested at the heating point.
Chemical composition of 65Mn steel: C 0.62-0.70, Si 0.17-0.37, Mn 0.90-1.20, Cr ≤ 0.25, Ni ≤ 0.30, Cu ≤ 0.25. 65Mn steel mechanical properties: tensile strength: ≥735 Mpa, yield strength: ≥430 Mpa, elongation after fracture: ≥9%, reduction of area: 30%, impact absorbed energy: no impact. RINA DH32 watertight bulkhead steel, 65Mn steel has high strength, high hardenability, less decarburization tendency, overheat sensitivity, easy to produce quenching cracks and temper brittleness. 65Mn steel is used for making various flat and round springs, leaf springs, spring rings, valve springs, steel wire cold coil springs, clutch springs of light trucks and cars.
The company specializes in heavy plate cutting, carbon steel pplate processing, carbon plate welding processing and sales of wide and thick steel RINA DH32 watertight bulkhead steel plates. It has high-quality CNC steel plate cutting and processing equipment, a professional technical personnel team, and supporting logistics distribution and after-sales service system. BBN company provides customers with solutions at low prices, high quality, and fast response service.
Leave a Message