The company's main business: ship plate, GL-EH 32 car carrier steel low alloy plate, automobile steel, high-strength plate, pipeline steel, boiler steel plate, weathering plate, wear-resistant plate, bridge plate, pressure vessel plate, steel plate, steel processing, etc. The company takes the implementation of high-end, GL-EH 32 car carrier steel high-quality, deep processing, strengthening the main business, diversified operation, group operation, enterprise transformation and upgrading as its development strategy, and makes all efforts to be your professional GL-EH 32 car carrier steel steel supplier and partner.
26SiMnMo (GY5) is armored bulletproof steel, code-named GY4, with good ballistic performance, welding performance and mechanical processing performance. It is suitable for combat command vehicles, explosion-proof vehicles, currency transport vehicles, bulletproof trucks, bulletproof cars, explosion-proof doors, and machines. Need a safe and so on. According to the clients’ requirements, the steel plates with a thickness of more than 10mm can be subjected to ultrasonic inspection one by one, and the acceptance level should be indicated in the contract.
Special boiler steel is derived from carbon structural steel. The chemical composition of boiler steel is basically the same as that of high-quality carbon structural steel of the same level, but the GL-EH 32 car carrier steel steel mechanical property requirements are more strict, especially for impact toughness. And the aging sensitivity is required to be small. The boiler steel should be deoxidized and the non-metallic inclusions should be removed during smelting. The structure should be uniform. The grain size should be controlled in 3-7 grades. The defects such as interlayer, shrinkage, porosity and porosity should be minimized.
The characteristic of niobium in GL-EH 32 car carrier steel etc. steel material is to increase the recrystallization temperature of austenite, so as to achieve the purpose of refining austenite grains. In general, the amount of niobium added in steel material is less than 0.05%, and the contribution of niobium above 0.05% to strengthening and toughening will no longer be obvious.
A204 Grade A steel chemical composition(%)Carbon: 0.18-0.25 Manganese max.: 0.90Phosphorus Max.: 0.025Sulfur Max.: 0.025Silicon: 0.15-0.40Molybdenum: 0.45–0.60GL-EH 32 car carrier steel, A204 Grade A steel mechanical propertiesTensile strength, kis [MPa]: 265-85 [450-585]Yield strength, min, kis [MPa]: 37 [255]Elongation in 8 in. [200 mm], min, %: 19Elongation in 2 in. [50 mm], min, %: 23
Our products have perfect after-sales system to protect the interests of customers. At the same time, we can according to GL-EH 32 car carrier steel customer's requirements, processing requirements, cutting technical requirements, etc., to develop detailed solutions for customers, so as to make customers 100% satisfied. If you have any requirements and needs, please contact us in time.
Our quality and service commitment: GL-EH 32 car carrier steel product quality problems, life-long replacement.In the process of using, any time if you find we supplied steel materials not conform to the requirements of technical standards, we can replace it for you free of charge. However, it should be noted that non product quality problems caused by improper use are not covered by the warranty. Please pay attention to the service time commitment as well as the product quality assurance commitment. Because only the products of big brands and reliable enterprises with complete after-sales service system can truly realize the long-term product quality assurance and the whole process of service.
Leave a Message