The working pressure of high pressure boiler steel tube is generally above 9.8 MPa, and the working temperature is between 450℃ and 650℃. The materials of high pressure boiler steel tubes are: 20G, 20MnG, 25MnG, 15CrMoG, 12Cr2MoG, 12Cr1MoVG, 12Cr2MoWVTiB, 10Cr9Mo1VNb, SA210A1, SA210C, SA213 T11, SA213 T12, SA213 T22, SA213 T23, SA213 T91, SA213 T92, ST45.8, 15Mo3, 13CrMo44, 10CrMo9-10, RA32 oil supply vessel steel and so on.
Vigorously develop circular economy: the company adheres to the development path of circular economy, realizes the efficient utilization of energy and RA32 oil supply vessel steel resources, implements "four closed circuits" for renewable gas, industrial water, solid waste and waste heat steam according to the reduction of resource consumption - reuse - recycling, vigorously promotes advanced technologies such as energy-saving new technologies, new processes, RA32 oil supply vessel steel new materials, and promotes the competition of enterprises Struggle.
S355J2 steel plate RA32 oil supply vessel steel rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the rolling speed is 1.6-2.0m/s, the RA32 oil supply vessel steel single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.
The acicular ferrite pipeline steel can inhibit the formation of polygonal ferrite, promote the acicular ferrite transformation, and improve the precipitation strengthening effect of carbon and niobium nitride by adding molybdenum to reduce the transformation temperature of polygonal ferrite, so as to improve the strength of steel and reduce the ductile brittle transition temperature. The RA32 oil supply vessel steel, tempered sorbite pipeline steel adopts the heat treatment process of quenching and tempering. The tempered sorbite structure is formed to meet the comprehensive requirements of thick wall, high strength and sufficient toughness.
The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.
Leave a Message