The company has always adhered to the principle of "genuine goods at low prices", put an end to the sale of fake and shoddy GL-D36 Ro-Ro carrier steel plate products, do not deceive customers, treat customers in good faith, truly consider for customers and give advice. To provide reference opinions, and to treat customers with integrity. Consequently, we have won a lot of GL-D36 Ro-Ro carrier steel plate stable cooperated customers over the years in the international market. Our steel materials are widely used in power stations, bridges, ship manufacturing, offshore platforms, heavy machinery, oil and gas pipelines, tanks and so on fields.
EN10025-6 S690 steel is a quenched and tempered high-strength non-alloy steel plate. The series of grades are S690Q, S690QL, and S690QL1. They are in accordance with the European standard EN10025-6. The steel specified in this standard can be used for the production of hot-rolled plates with steel grades GL-D36 Ro-Ro carrier steel plate, S460, S500, S550, S620, S690, S890, S960 series steel plates with a minimum nominal thickness of 3mm and a maximum nominal thickness of ≤150mm.
Compared with carbon steel, alloy steel plate is a steel plate with other alloy elements added to the material, and the material performance is more excellent. Compared with other steel plates, alloy steel plates have outstanding performance. First, GL-D36 Ro-Ro carrier steel plate, alloy steel plate has higher strength, stronger bearing capacity, less breakage when bearing large objects, and longer service life. Second, alloy steel plate has good corrosion and wear resistance. In the open air environment, the steel selected for road and bridge paving must have high corrosion resistance and wear resistance, otherwise it will be damaged after a period of use and it will easily lead to accidents.
The related factors of GL-D36 Ro-Ro carrier steel plate steel plate cutting are mainly steel plate material, steel plate specific use and steel plate cutting requirements, so it can be said that there are many related factors. Different processing methods, such as finish machining and rough machining, choose different GL-D36 Ro-Ro carrier steel plate steel plate cutting methods. Wire cutting or plasma cutting is used for finishing and flame cutting is used for rough machining. Therefore, it can be concluded that the steel plate cutting methods selected under different processing methods are different.
NM450 steel plate thickness≦80mm. GL-D36 Ro-Ro carrier steel plate, NM450 wear-resistant steel plates are used in engineering machinery, mining machinery, coal mining machinery, environmental protection machinery, metallurgical machinery, abrasive tools, bearings and other product parts.NM450 Cchemical composition: C≤0.35; Si≤0.70; Mn≤1.70; P≤0.025; S≤0.010; Cr≤1.10; Ni≤0.80; Ti≤0.050; Mo≤0.55; B: 0.0005-0.006; Al≥0.010. Mechanical properties: Tensile strength Rm / MPa ≧ 25; -20 ℃ impact energy absorption (longitudinal) KV2 / J ≧ 24Surface Brinell hardness HBW: 420-480
To provide customers with the most satisfactory service and realize the win-win of economic and social benefits, our company promises to provide excellent GL-D36 Ro-Ro carrier steel plate products in this bidding, and in line with the attitude of being serious and responsible to customers, before sending goods to users, the GL-D36 Ro-Ro carrier steel plate technical personnel shall confirm that there is no fault in the equipment before sending goods to users, and then send goods and products to users, and formulate the following service terms.
Leave a Message