The company's main business: ship plate, normalized CCS grade E bulk vessels steel low alloy plate, automobile steel, high-strength plate, pipeline steel, boiler steel plate, weathering plate, wear-resistant plate, bridge plate, pressure vessel plate, steel plate, steel processing, etc. The company takes the implementation of high-end, normalized CCS grade E bulk vessels steel high-quality, deep processing, strengthening the main business, diversified operation, group operation, enterprise transformation and upgrading as its development strategy, and makes all efforts to be your professional normalized CCS grade E bulk vessels steel steel supplier and partner.
For S420NL weldable fine grain structural steel plate, it is produced under specification EN 10025-3. The yield strength of S420NL plate shall be above 420Mpa for the thickness below 16 millimeter, 400MPa min. for thickness below 40mm, 390MPa min. for thickness below 63mm. The tensile strength for thickness below 100mm of this steel grade S420NL shall be within 520-680Mpa. For the Mill test certificates of steel S420NL,normalized CCS grade E bulk vessels steel, our mill would like to issue format according to EN 10204 3.1.
The surface quality of pickling coil is very good. Compared with ordinary hot-rolled plate, normalized CCS grade E bulk vessels steel, the surface quality of hot-rolled pickling coil is improved in addition to the oxide scale on the surface, which is convenient for welding, oiling and painting. The accuracy of pickling coil specification is high. After leveling, the shape of the plate changes to a certain extent, thus reducing the deviation of unevenness, improving the surface finish and enhancing the appearance effect of pickling coil.
Semi-endless rolling technology has three advantages: the normalized CCS grade E bulk vessels steel product's limit thickness and limit width specification range has been significantly expanded. The thinnest thickness of SPHC steel has been expanded from 1.0 mm to 0.78 mm, and the limit specification product width has been expanded from 1100 mm to 1300 mm; The thinnest thickness of Q235B steel has been expanded from 1.2 mm to 1.0 mm, and the width range of the limit specification products has also been further expanded.
API 5L steel is pipeline steel mainly for use in oil and gas industry. API 5L steel has PSL1 and PSL2 levels. For same API 5L steel grade, the carbon content for PSL1 is higher than PSL2. Meanwhile, the API 5L PSL2 steel has more strict requirement for P, S content than API 5L PSL1 steel, normalized CCS grade E bulk vessels steel. Therefore, API 5L PSL2 steel strength is higher than API 5L PSL1 steel strength. For example, API 5L X42 PSL2 yield strength is 317-524 MPa, tensile strength is 434-758 MPa. While API 5L X42 PSL1 yield strength is 290 MPa min. , tensile strength is 414 MPa min.
The company's after-sales service tenet is "customer first, timely guarantee, enthusiastic service and effective work". In order to establish a set of perfect after-sales service system and strict management system, so that the after-sales service can be effectively guaranteed. The company has set up after-sales service department to ensure timely, unique and effective response to every user's request, coordinate internal resources internally, and put an end to all evasion and delay.
Leave a Message