The company's main business: ship plate, KA 32 crane vessel steel low alloy plate, automobile steel, high-strength plate, pipeline steel, boiler steel plate, weathering plate, wear-resistant plate, bridge plate, pressure vessel plate, steel plate, steel processing, etc. The company takes the implementation of high-end, KA 32 crane vessel steel high-quality, deep processing, strengthening the main business, diversified operation, group operation, enterprise transformation and upgrading as its development strategy, and makes all efforts to be your professional KA 32 crane vessel steel steel supplier and partner.
AISI4140 steel plate is used to make forgings that require higher strength and larger quenched and tempered section than 35CrMo steel, such as large gears for locomotive traction, turbocharger transmission gears, pressure vessel gears, rear axles, connecting rods with extremely high loads, and Spring clip. It can also be used for oil deep well drill pipe joints and fishing tools below 2000m, and can be used for molds of bending machines.
Compared with 15Cr steel, 20Cr alloy has higher strength and hardenability. The critical hardening diameter in oil is 4-22mm, and the critical hardening diameter in water is 11-40mm, but the toughness is poor. This KA 32 crane vessel steel alloy steel KA 32 crane vessel steel still has a tendency to grow grains during carburization, and direct quenching at lower temperature has a greater impact on impact toughness, so secondary quenching is required after carburization to improve the toughness of the core of the part, and there is no temper brittleness.
Rolling steel is the process of pressing to change the shape of the ingot and billet between the rotating rolls. The so-called steel rolling process is a combination of a series of steel rolling processes. The entire rolling production process is always composed of the following KA 32 crane vessel steel basic processes: ① billet preparation:Including the cleaning of surface defects, the removal of surface scale and the pre-heat treatment of billets. ② billet heating ③ steel rolling: it is the core of the entire rolling production process. ④ Finishing.
KA 32 crane vessel steel, No.45 seamless pipe belongs to high quality carbon structural steel. The carbon (C) content of No.45 seamless pipe is 0.42 ~ 0.50%, Si content is 0.17 ~ 0.37%, Mn content is 0.50 ~ 0.80%, Cr content is ≤ 0.25%, Ni content is ≤ 0.30%, Cu content is ≤ 0.25%. The tensile strength, yield strength, elongation, reduction of area and impact energy of No.45 seamless pipe are 600 MPa, 355 MPa, 16% and 40% respectively. No.45 seamless pipe is used to manufacture high strength moving parts.
First of all, we should establish a correct concept of after-sales service. Service concept is an important part of corporate culture and a long-term enterprise value concept. Our company's after-sales service embodies the concept of "customer first, sincere service for customers". As long as we are in the "sincere service for users" under the guidance of the idea, I believe we will get rich returns.
Leave a Message