Is stainless steel as strong as BV DH36 hull shipbuilding plate?

BBN is a BV DH36 hull shipbuilding plate world leader in exporting A106 / SA 106 pipe and stocks a full range of grades B/C with a size rage NPS 1/8" to NPS 48", with nominal (average) wall thickness as given in B36.10.

The size, shape, weight and allowable deviation of Q390D, Q390D-Z35 steel plate should comply with the provisions of GB/ T709-2016. The maximum thickness of the steel plate is 135mm. When the BV DH36 hull shipbuilding plate, Q390D steel, Q390D-Z35 plate thickness is less than 100 mm, the required performance level in the thickness direction is z25; when the thickness is ≥ 100 mm, the required performance level in the thickness direction is Z35, which shall specifically comply with the provisions of GB/T5313-2010.

Just as BV DH36 hull shipbuilding plate, the boiler steel plate also has strict control of chemical composition for the material, especially harmful elements such as phosphorus and sulfur, and residual elements such as chromium, nickel, and copper; during smelting, good deoxidation and removal of non-metallic inclusions should be carried out to ensure good quality, plasticity and toughness. The organizational structure requires uniformity, and the grain size is controlled within a certain range; there are also strict requirements for surface quality and internal defects. In addition, the boiler steel plate mechanical properties at room temperature and high temperature must be guaranteed.

BV DH36 hull shipbuilding plate, Wear-resistant steel plates are composed of two parts, namely carbon steel plate and alloy wear-resistant layer. Under normal circumstances, the thickness of the alloy wear-resistant layer of the wear-resistant steel plate is 1/3-1/2 of the total thickness. When working, the matrix provides comprehensive properties such as strength, toughness and plasticity against external forces. And the alloy wear-resistant layer provides wear-resistant properties to meet the requirements of specified working conditions.

BV DH36 hull shipbuilding plate, 12Cr1MoV steel is alloy structure steels, and it is usually produced into 12Cr1MoV steel coil, 12Cr1MoV steel sheet, 12Cr1MoV steel plate, 12Cr1MoV steel bar, etc. 12Cr1MoV steel is composed of Carbon, Silicon, Manganese, Chrome, Molybdenum and so on chemical elements. Amng them, the C content is 0.08-0.15, Si 0.17-0.37, Mn 0.40-0.70, Cr 0.90-1.20, Mo 0.25-0.35. The tensile strength of 12Cr1MoV steel is not lower than 490 Mpa, and yield strength is not lower than 245 Mpa.

It is a modern high-tech professional enterprise integrating scientific research, BV DH36 hull shipbuilding plate production and sales. The company is mainly engaged in the manufacture, installation and commissioning of boiler and pressure vessel, chemical, metallurgical, petroleum and other equipment, as well as BV DH36 hull shipbuilding plate process technology development, technology transfer and related technical consulting and technical services.

Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.