Hot rolled sheet ABS F36 hull steel plate

Standing at a new historical starting point, we adapt to the requirements of supply side ABS F36 hull steel plate structural reform, adhere to the overall strategy of "innovation driven, quality leading, quality improving and efficiency increasing, transformation and development", and constantly improve the development concept and development level with a forward-looking vision and grand vision. Now we have been ranked the International leading ABS F36 hull steel plate steel materials supplier.

Q355GNH weathering steel: Q——The first letter of the Chinese pinyin of "Qu" in the yield strength;
355——The lower limit of the lower yield strength of steel, in N/mm²;
GNH——respectively the first letter of "Gao, Nai, Hou" Chinese Pinyin;
Quality grades are divided into A, B, C, D, E
(1)Q355GNH executive standard: GB/T 4171-2008
(2)Q355GNH smelting method: the steel is smelted by converter or electric furnace, and it is killed steel.

The mechanical properties of 20MnV steel are as follows: tensile strength 785 MPa, yield strength 590 MPa, elongation after fracture 10%, reduction of area 40%, impact absorption energy 55 J. ABS F36 hull steel plate, 20MnV steel has good properties, good strength, toughness and plasticity, good hardenability and machinability. After carburizing, 20MnV steel can be directly quenched without secondary quenching to improve the core structure. The weldability of 20MnV steel is good, but there is temper brittleness at 300-360 ℃ during heat treatment.

There is an inherent difference between the cold forming properties of low-alloy high-strength steel and carbon structural steel. First of all, a certain amount of permanent deformation of low-alloy high-strength steel requires greater force than ABS F36 hull steel plate, carbon structural steel of the same size. Second, when low-alloy high-strength steel is formed, a slightly larger allowable amount for springback should be given. According to experience, unless the low-alloy high-strength steel is processed to control the shape of inclusions, it is necessary to use a larger bending radius than carbon structural steel during cold forming.

ASTM A285 grade A standard specification for pressure vessel plates. ABS F36 hull steel plate, carbon steel, low- and intermediate-tensile strength. ASTM A285 grade A plates are normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both.Supplementary Technology: HIC Test I NACE MR0175 1 215 | Z25 | 235 | S57 | S57.1| S58 | S58.1 1S3 |S4 Thickness: 6MM to 300MM.Width: 1500mm to 4050mm.

Our company regularly visits customers, consults and follows up the after-sales service, and directly solves problems for customers. In the use of our steel materials, whether quality problems or not, the after-sales will help solve the problem as soon as possible. We promise free life-long replacement for any product quality problems. The sound after-sales service system make you free from worries.