Hot rolled NV B cargo ship steel vs stainless steel

Since it was established in 2000. Based on the domestic rich NV B cargo ship steel product resources and the great steel demand of the international market, our NV B cargo ship steel service has already spread many countries in Europe , America, Southeast Asia, Middle East, South America, Africa, etc, and we have won an outstanding reputation for its professional exporting steel products

40Cr steel is one of the most widely used steels for mechanical operations. The hardenability of this steel is outstanding, it can be hardened to Ф28 ～ 60mm when water quenching, and Ф15 ～ 40mm when oil quenching. In addition to quenching and tempering treatment, 40Cr steel is also suitable for cyanidation and high frequency quenching treatment. 40Cr steel has good cutting performance. When the hardness is 174 ～ 229HB, the relative machinability is 60%. The steel is suitable for making medium-sized plastic molds.

When using NV B cargo ship steel, low-alloy high-strength steel, it is desirable to take advantage of its high strength and use a thinner section, not only for saving weight but also for the economy as much as possible. However, the corrosion factor must be fully considered. The thinner the steel section, the more attention should be paid to corrosion protection. Some low-alloy high-strength steels have good atmospheric corrosion resistance, which can not only improve the effect of anti-corrosion coatings, but in some cases, take appropriate precautions and can even be used without being coated in the atmosphere.

The main applications of normalizing are as follows:① For low carbon steel, NV B cargo ship steel. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④ Normalizing can refine the cast structure and improve the machinability of steel castings.

2000 tons hot rolled sheet NV B cargo ship steel inventory list
7*2920*8780, 6*1650*10570, 5.5*3000*5000, 6*2310*8500, 6*2750*9600, 7*2000*8950, 5*2570*8000, 6*1850*7510, 7*2560*8600, 8*2100*8000, 6*1750*8500, 7*2920*13000, 7*2920*8780, 8*2920*6300, 6*2960*10700, 6.5*2200*10000, 8*1800*6850, 8*3040*4000, 8*1500*4850, 8*1700*6300, 10*2000*7700, 10*2030*8200, 10*1750*6000.

The after-sales service personnel understand the user's ideas and needs in detail, and stand on the other side's position and interests. Actively communicate with users and help them solve practical problems. This not only solves the service problem, but also improves the customer's trust in the company.