Hot rolled GL-E hot-rolled plates mechanical properties

We are a professional steel raw material supplier with a history of 17 years. After years of development, the company's steel plates and coils are widely used in construction, machinery manufacturing, container manufacturing, shipbuilding, bridge construction and other fields around the world. With good product quality, we have solid project cooperation with foreign governments or leading enterprises such as Egypt, Bangladesh, Myanmar, Thailand, Philippines, Vietnam, Venezuela, Peru, Mexico, the United States, Portugal, Russia, Iran, Iraq, Pakistan, etc.
GL-E hot-rolled plates

Characteristics of 50CrMo4 steel: 50CrMo4 steel has high strength and toughness, good hardenability and no obvious tempering brittleness. 50CrMo4 steel is suitable for manufacturing large and medium-sized plastic mould with certain strength and toughness. 50CrMo4 steel can be used to manufacture the big gear for locomotive traction, booster drive gear, pressure vessel gear, rear axle, connecting rod and spring clamp with great load, as well as the drill pipe joint and fishing tool for oil deep well below 2000m, and 50CrMo4 steel can also be used for the die of bending machine, etc.
GL-E hot-rolled plates

12Cr1MoVR steel plate is suitable for medium and high temperature pressure vessels, and implements GB713-2014 standard 12Cr1MoVR pressure vessel plate is usually delivered in normalizing + tempering state According to the special agreement at the time of order, 12Cr1MoVR steel plate can also be delivered in annealing or tempering state, which significantly improve the plasticity and impact toughness of steel, and improve the anisotropy of steel,GL-E hot-rolled plates.

Plasma cutting has a wide range of applications. With different working gas, it can cut various kinds of metals that are difficulty to handle by oxygen cutting. Plasma cutting is fast and efficient when cutting metal with small thickness. The cutting speed can reach more than 10m/min. Plasma cutting can get a clean, neat, non stick slag cutting surface, while the deformation and thermal effect of the incision are small, its hardness change is little, and the cutting quality is good.
GL-E hot-rolled plates

GL-E hot-rolled plates,As per JIS G3101 standard, the Carbon (C), Silicon (Si) and Manganese (Mn) content of SS400 steel plate are not controlled. Phosphorus (P) content of JIS SS400 steel plate is 0.050% Max and Sulphur (S) content is 0.050% Max. The SS400 steel melting point is 1430 Degree Celsius, Brinell Hardness is 160HB, density is 7.85g/cm3, Young’s Modulus is 190-210Gpa. The strength and elongation of JIS SS400 steel plate varies with thickness. Generally, the tensile strength of SS400 steel plate is 400-510 Mpa. Elongation is above 21%. Yield strength ≥245Mpa for thickness≤16mm. When the JIS SS400 steel plate is thciker than 100mm, the yield strength shall not less than 205Mpa.

GL-E hot-rolled plates,The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.
GL-E hot-rolled plates