At the same time of doing well in CCS grade E carbon marine steel plate production and operation, Yunnan company focused on completing the four phases of technical transformation construction projects, realizing industrial upgrading, improving equipment level, and laying a good foundation for the future development of the company. In the CCS grade E carbon marine steel plate technological transformation project, pollution control facilities have been built synchronously, and a large number of comprehensive utilization projects, such as comprehensive sewage treatment and recycling project, blast furnace gas waste heat and residual pressure power generation, have been invested and constructed.
EN10025-2 S355JR low alloy steel grade is equivalent to GB Q345B in Chinese standard. For the normal thickness, these two steel grades are both owned 345MPa yield strength. Plate S355JR+N indicates that the S355JR steel plate must be done Normalized heat treatment when rolling for improve the steel strength and weldability. Our mill would roll CCS grade E carbon marine steel plate, S355JR alloy steel plate under as rolled or control rolled when customers' have not requested any heat treatment in their P/O.
40B steel plate is alloy structural steel plate formed by adding boron to the carbon structural steel with a carbon content of 0.40%. CCS grade E carbon marine steel plate, 40B steel plate has high hardness, toughness and hardenability, and has good comprehensive mechanical properties after quenching and tempering, which can be used instead of 40Cr steel. 40B steel plate chemical elements: C: 0.37-0.44, Si: 0.17-0.37, Mn: 0.60-0.90, B: 0.0005-0.0035. 40B steel plate is used to manufacture parts with larger section and higher performance requirements.
Nickel element is mainly used to form and stabilize the austenite structure, so that the CCS grade E carbon marine steel plate steel has good mechanical properties, corrosion resistance and process performance. Molybdenum can quickly passivate stainless acid-resistant steel, and improve the corrosion resistance to solutions containing chloride ions and other non-oxidizing media. Titanium and niobium are usually used to fix the carbon in alloy steel and make it generate stable carbides to reduce the harmful effect of carbon on the corrosion resistance of alloy steel.
"High strength low alloy steel plate pecifications: CCS grade E carbon marine steel plate, A516 Grade 60 plates and sheets are producted with thickness up to 200mm [8 inch].A516 Grade 60/70 Dual Certified HIC NACE TM0284 Plates Hydrogen Induced Cracking;Hot Rolled Steel ASTM A516 Grade 60 Dual Certified HIC Tested Plates in accordance with Nace Test Method, ASTM A516 70 HIC Tested (Hydrogen Induced);Tested Fine Grained Pressure Vessel Steel Plates For Sour Gas Service."
The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.
Leave a Message