BEBON Iron & Steel has fully passed the ISO9001 quality system certification, marine steel has passed 9 countries' classification societies, and construction steel has obtained the CE Lloyd's CE Mark certification. The main body of CCS A32 offshore steel material steel passed ISO14001 environmental management system certification and OHSAS18001 occupational health and safety management system certification. The main CCS A32 offshore steel material production processes and technical equipment of the enterprise have reached the international advanced level, the comprehensive competitiveness has entered the international advanced ranks, and the international influence has been significantly enhanced.
15CrMo alloy plate is a heat-resistant steel with pearlite structure, which has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain resistance to hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in steel, the hardening tendency of CCS A32 offshore steel material and 15CrMo alloy plate is obvious and the weldability is poor. After welding, local high temperature tempering treatment should be carried out. The heat treatment process of 15CrMo alloy plate is as follows: the temperature rise rate is 200°C/h, the temperature is raised to 715°C for 1 hour and 15 minutes, the temperature drop rate is 100°C/h, and the temperature is reduced to 300°C before air cooling.
Grade Q420 steel has high strength, especially in the normalizing or normalizing and tempering state. CCS A32 offshore steel material, Q420 steel has high comprehensive mechanical properties. Q420 steel is mainly used for large ships, bridges, power station equipment, medium and high pressure boilers, high pressure vessels, rolling stock, hoisting machinery, mining machinery and other large welded structural parts. Grade Q460 steel, with high strength, has high comprehensive mechanical properties in normalizing, normalizing and tempering or quenching and tempering states. The quality grades are C, D, E. Q460 steel is used in various large engineering structures and light structures requiring high strength and heavy load.
S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the CCS A32 offshore steel material rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of CCS A32 offshore steel material steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.
"Adopt standard specification: ASTM, JIS, EN, DINCategory: Structural Steel, carbon steel plate, CCS A32 offshore steel material, hot rolled plateCarbon steel plate specification: Thickness: 1mm to 200mm; Width: 1500mm to 3500mm: Length: 3000mm to 27000mmThird Party Inspection: ABS, DNV, BV, GL, CCS, LR, RINA, KR, NK, CE, SGS, IKE, IEI or other quality department."
The after-sales service personnel understand the user's ideas and needs in detail, and stand on the other side's position and interests. Actively communicate with users and help them solve practical problems. This not only solves the service problem, but also improves the customer's trust in the company.
Leave a Message