The company will also put Georgetown steelworks on "care and maintenance mode" and temporarily lay off or redeploy about 130 employees working at the steelworks and contractors while some 150mm GL-FH 40 hull structural steel maintenance employees will be on staff during the closure. It is stated that unemployment insurance and state-based unemployment support will be available immediately to workers affected by these changes.
BBN company team and culture: tt the end of 2019, in order to thank employees for their hard work and enrich their sparetime lives, the company organized a pleasant trip to Phuket Island, Thailand. This tour lasted 6 days and 5 nights, and returned by plane on the evening of December 27. We took off in Zhengzhou at about 5o'clock in the afternoon on the 22th December. Let's seize the day and live it to the full, and greet the arrival of the year 2020 together.
SA516Gr.60 (HIC) steel plate is mainly used in the manufacture of equipment used in wet hydrogen sulfide environment, such as: liquefied petroleum gas desulfurization system, catalytic cracking stable absorption system, atmospheric and vacuum distillation tower condensation system, etc. The material 150mm GL-FH 40 hull structural steel has the characteristics of high purity, low P, low S, good uniformity of structure and mechanical properties, resistance to hydrogen cracking and sulfide stress corrosion.
The difference of chemical composition between 150mm GL-FH 40 hull structural steel, Q420D steel and Q460D steel: Chemical composition of Q420D steel: C ≤ 0.20, Si ≤ 0.50, Mn ≤ 1.70, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.07, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.30, N ≤ 0.015, Mo ≤ 0.20, Al ≥ 0.015. Chemical composition of Q460D steel: C ≤ 0.20, Si ≤ 0.60, Mn ≤ 1.80, P ≤ 0.030, S ≤ 0.025, Nb ≤ 0.11, V ≤ 0.20, Ti ≤ 0.20, Cr ≤ 0.30, Ni ≤ 0.80, Cu ≤ 0.55, N ≤ 0.015, Mo ≤ 0.20, B ≤ 0.004, Al ≥ 0.015. The difference of mechanical properties between 150mm GL-FH 40 hull structural steel, Q420D steel and Q460D steel: The mechanical properties of Q420D steel: yield strength ≥ 420 MPa, tensile strength 500-680 MPa. The mechanical properties of Q460D steel: yield strength ≥ 460 MPa, tensile strength 500-720 MPa.
The Seamless Pipe Q345D to Thailand. In November of 2015, Thailand OTTO group contacted with us from Internet. They are finding the trustable supplier of S355/2H seamless pipe for the cable car supporter. Due to the special using of the pipes, they are very careful and serious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and products quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1800 tons pipe to us directly.
We have a professional production team and high-quality production equipment, and we also have a great 150mm GL-FH 40 hull structural steel advantage in price, with its own factory, large-scale production to reduce the price. Strictly control each production line to ensure the 150mm GL-FH 40 hull structural steel production of high-quality steel plates, steel pipes and other products that meet customer requirements.
Leave a Message