High weather resistance structural steel Q295GNH, Q355GNH adds a small amount of alloying elements such as Cu, P, Cr, Ni, etc. to form a protective layer on the basic surface of the metal to improve the steel with atmospheric corrosion resistance. High weather resistance structural steel is mainly used in the structure of vehicles, containers, buildings, towers or other structural parts. Compared with welded structural steel TMCP A131 EH36 offshore structure steel, it has better atmospheric corrosion resistance.
The cold rolled sheet does not produce scale because it is rolled at room temperature. Therefore, the surface quality of cold plate is good and the dimension precision is high. In addition, the mechanical and technological properties of cold rolled coil are better than that of hot-rolled steel sheet. In many fields, especially in the field of home appliance manufacturing, it has gradually replaced hot-rolled steel sheet, TMCP A131 EH36 offshore structure steel.
Magnetic particle flaw detection is only suitable for detecting surface defects, which means that by laying magnetic powder on the surface of the equipment and using its aggregate shape on the surface defects of the magnetic material equipment to determine the position, size and shape of the defect. This TMCP A131 EH36 offshore structure steel method has a relatively low cost and is easy for steel production enterprises to adopt in batches. However, for special steel profiles with deeper thickness, whether this method is used to detect hidden defects is yet to be verified.
The strip steel thickness is generally below 6mm, which is convenient for crimping and processing. You should choose the TMCP A131 EH36 offshore structure steel, strip steel specifications according to your own purposes. The specifications and materials used for different purposes are different, so you must confirm it before buying. It is best to ask professionals to give advice before purchasing strip steel, and purchase the specifications and types you need according to the corresponding requirements.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
Leave a Message