Our company specializes in the production of steel plates, steel coil, steel sections, welded pipes and seamless pipes products, sales of GB, ASME, ASTM, JIS, DIN, EN, API and other standards and specifications of steel KF36 offshore engineering steel and deep-processed products, facing the domestic and foreign markets, welcome to call for inquiries. It is a modern high-tech professional enterprise integrating scientific research, production and sales.
Austenitic stainless steel has good plasticity and low strength, but its corrosion resistance is the best among the stainless steels. KF36 offshore engineering steel, Austenitic stainless steel is suitable for the occasions where the mechanical properties are not required to be very high, such as chemical plants, chemical fertilizer plants, sulfuric acid and hydrochloric acid manufacturers, etc. Of course, austenitic stainless steel can also be used in submarine and other military industries.
12Cr1MoVR steel plate is suitable for medium and high temperature pressure vessels, and implements GB713-2014 standard. 12Cr1MoVR pressure vessel plate is usually delivered in normalizing + tempering state. According to the special agreement at the time of order, 12Cr1MoVR steel plate can also be delivered in annealing or tempering state, which significantly improve the plasticity and impact toughness of steel, and improve the anisotropy of steel.
Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This KF36 offshore engineering steel rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.
The executive standard of P235TR1 steel is EN 10216-1. KF36 offshore engineering steel, P235TR1 steel is suitable for manufacturing pipes, vessels, equipment, pipe fittings and steel structures. Chemical composition of P235TR1 steel: C ≤ 0.16, Si ≤ 0.35, Mn ≤ 1.2, P ≤ 0.025, S ≤ 0.02, Cr ≤ 0.30, Mo ≤ 0.06, Ni ≤ 0.30, Cu ≤ 0.30, Nb ≤ 0.01, Ti ≤ 0.04, V ≤ 0.02. Chemical composition of P235TR1 steel: tensile strength 360-500 MPa, yield strength ≥ 235 MPa, elongation ≥ 25%. The main steel pipe grades under EN 10216-1 are P195TR1, P195TR2, P235TR1, P235TR2, P265TR1 and P265TR2.
The company has passed the ISO9001: 2008 quality system certification, strictly implemented the ISO9001 quality management system. Besides, we have continuously improved the after-sales service network to make every effort to provide more convenient, accurate and faster services for all customers. We will supervise the production, control the quality in the factory, Inspect the cargo before shipment, Issue the test report to sales department. From the steel prodcution to steel delivery, we always focus the whole process.
Leave a Message