normalized ABS E32 marine contruction steel, ASTM A131 shipbuilding steel has different grade levels. The ordinary strength shipbuilding steel grades are grade A/B/D/E. Their min. yield strength is 235 Mpa, and tensile strength is 400-520 Mpa. The higher strength shipbuilding steel grades are grade AH32/DH32/EH32/FH32, AH36/DH36/EH36/FH36 AH40/DH40/EH40/FH40. The min. yield strength of AH32/DH32/EH32/FH32 steel is 315 Mpa, and tensile strength is 440-590 Mpa. The min. yield strength of AH36/DH36/EH36/FH36 steel is 355 Mpa, and tensile strength is 490-620 Mpa. The min. yield strength of AH40/DH40/EH40/FH40 steel is 390 Mpa, and tensile strength is 510-650 Mpa.
The tight supply of coal in Bohai Rim ports has eased, but high-calorie and low-sulfur coal is still in short supply; port resources are tight, traders are reluctant to sell at low prices, and the sentiment remains strong. Although the coal storage of key power plants is relatively high, the coal storage of coastal power plants is in the middle, and the enthusiasm for pulling transportation still exists. As the weather gradually turns colder, downstream power consumption increases, procurement demand continues to increase, and power plants release demand.
Try to use normalized ABS E32 marine contruction steel high-quality alkaline covered electrode as much as possible, and don't use inferior electrode to save money. According to the theory of chromium poor, chromium carbide will be precipitated on the upper edge of the grain boundary of the weld and heat affected zone when the normalized ABS E32 marine contruction steel temperature range is between 450 ℃ and 850 ℃, resulting in chromium poor grain boundary, which is insufficient to resist corrosion.
Flat normalized ABS E32 marine contruction steel steel plate, with a small thickness of the plate. Low carbon equivalent, to adapt to automatic submerged arc welding, plasma welding and other normalized ABS E32 marine contruction steel welding process requirements.
Leave a Message