BEBON Iron & Steel has fully passed the ISO9001 quality system certification, marine steel has passed 9 countries' classification societies, and construction steel has obtained the CE Lloyd's CE Mark certification. The main body of hot rolled RA 40 hull steel plate steel passed ISO14001 environmental management system certification and OHSAS18001 occupational health and safety management system certification. The main hot rolled RA 40 hull steel plate production processes and technical equipment of the enterprise have reached the international advanced level, the comprehensive competitiveness has entered the international advanced ranks, and the international influence has been significantly enhanced.
ST52 steel angle steel with carbon content of 0.23% and yield point strength of 355 MPa is suitable for weldable and supporting members. In terms of chemical composition and mechanical properties, s355n is similar to hot rolled RA 40 hull steel plate en10025 - 3. Compared with ASTM A36, ST52 has higher strength and better welding performance. It is also used in daily life and industrial applications such as warehouses, equipment, etc. Note: although similar hot rolled RA 40 hull steel plate properties are shared, they are a little different. Please let us know your detailed requirements and we will tell you the most suitable steel grade.
Q345R steel plate is a special pressure vessel steel with a yield strength of 340 Mpa. hot rolled RA 40 hull steel plate, Q345R pressure vessel steel has good comprehensive mechanical and technological properties. The content of phosphorus and sulfur of Q345R pressure vessel steel is slightly lower than that of Q345 (16Mn) steel, and the tensile strength and elongation requirements of Q345R pressure vessel steel are higher than those of Q345 (16Mn) steel, and the impact toughness of Q345R pressure vessel steel is also required. Q345R pressure vessel steel is the most widely used Chinese pressure vessel steel.
Laser cutting, it is a specific way of cutting hot rolled RA 40 hull steel plate steel plate cutting processing, is also one of the common way of cutting its on the cutting or machining parameters, if you want to get the right number, is that you can adjust these parameters to achieve a goal, adjust a few times more to get accurate numerical right in addition, we also need to know is, the faster the cutting hot rolled RA 40 hull steel plate speed, the light intensity is smaller, so, the smaller the laser penetration is, in turn, can control the penetration depth of laser.
hot rolled RA 40 hull steel plate, Q355GNH weather resistant steel plate is one of our main product, it is belong to the weather resistant steel plate. We can supply the different sizes of Q355GNH weather resistant steel plate. And the rolling size of Q355GNH weather resistant steel plate is following: the thickness range is 1.2-150mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. Also note that the Q355GNH weather resistant steel coil thickness should not exceed 25 mm.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
Leave a Message