The company now has marine grade KD32 hull steel plate oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than marine grade KD32 hull steel plate 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.
S355G10 + M steel plate is for marine engineering. "S" indicates structural steel, "355" indicates minimum yield strength of steel plate, and "G10" indicates mechanical function test that imitates post-weld heat treatment. "M" indicates control rolling. S355G10 + M plate is structural steel for marine engineering and belongs to European standard high-strength structural steel. S355G10 + M steel plate has good mechanical function, welding function and technological function.
Application of marine grade KD32 hull steel plate stainless steel coil: 1. Automobile industry. As a structural material of automobile, stainless steel coil can not only greatly reduce the weight of vehicle, but also greatly improve the service life of automobile. 2. Water storage and transportation industry. The storage and transportation equipment based on stainless steel coil is recognized as the most sanitary, safest and most efficient water industry equipment. 3. The construction industry. The decorative panels of exterior walls and interior walls are generally made of stainless steel, which is not only durable, but also very beautiful.
The main applications of normalizing are as follows:① For low carbon steel, marine grade KD32 hull steel plate. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④ Normalizing can refine the cast structure and improve the machinability of steel castings.
20 # material is a high-quality low-carbon carbon steel, cold-extruded, carburized and hardened steel. marine grade KD32 hull steel plate, 20 # material has low strength, good toughness, plasticity and good weldability. Chemical composition of 20 # round steel bar: C: 0.17 ~ 0.23, Si: 0.17 ~ 0.37, Mn: 0.35 ~ 0.65, S: ≤0.035, P: ≤0.035, Cr: ≤0.25, Ni: ≤0.30, Cu: ≤0.25. 20# carbon steel mechanical properties: Shear strength 275 ~ 392MPa, Tensile strength is 253 ~ 500MPa, elongation min. 25%.
Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.
Leave a Message