Chinese suppliers of normalized ABS EH36 naval engineering steel

It is easy to confuse ship plate with ordinary steel plate. What are the differences between ship plate and ordinary steel plate? First, compared with the ordinary steel plate, the thickness of the ship plate is thicker and the accuracy is better. Otherwise, it will be broken by the impact of sea water during the operation, which will bring life danger to the personnel on the ship. Second, compared with ordinary steel plate, normalized ABS EH36 naval engineering steel, the corrosion resistance of ship plate is more outstanding. The ship is immersed in sea water for a long time, if it does not have good corrosion resistance, then the ship plate will rust easily, and the weight of the ship will become larger, and it will also bring pollution to the sea water and cause ecological damage.

normalized ABS EH36 naval engineering steel 1000 tons in warehouse
5.5*3000*5000, 7*2920*8780, 7*1850*6000, 7*2920*13000, 5*2570*8000, 6*2750*9600, 5.5*2450*6500, 6*1850*7510, 6*1750*8500, 7*2560*8600, 8*1620*7870, 8*1500*4850, 8*3040*4000, 7*2920*8780, 10*1500*6850, 5*2570*8150, 6*2310*8500, 8*1700*6300, 5*2490*8200, 8*2100*7800, 10*3000*4750, 10*1750*6000, 5*2490*9000, 8*2090*6640.

Pakistan's iron and steel industry has suspended normalized ABS EH36 naval engineering steel production and operation since the outbreak, the dawn reported on April 8. Last month, Prime Minister Imran announced a rescue package for the steel industry. Recently, Pakistan's steel industry called for the resumption of production as soon as possible.

Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as normalized ABS EH36 naval engineering steel, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.