The yield strength of A36, D36, E36 and F36 is not less than 355N/mm^2, and the NV F36 combination carrier steel tensile strength is 490~620N/mm^2. A, D, E and F respectively indicate that they can be at 0° and -20 ° respectively. Impact toughness that can be achieved at -40℃, -60 ℃.
Focusing on the energy conservation and emission reduction objectives proposed by the municipal government, the company gives full play to the advantages of NV F36 combination carrier steel circular economy formed after the comprehensive completion and operation, and vigorously promotes the implementation of energy conservation objectives. Through measures such as energy saving, technological innovation and NV F36 combination carrier steel management strengthening, the energy saving target of annual reduction of added value energy consumption by 7%. It has made great contribution to energy saving of over completion.
Quenching is a heat treatment process in which steel parts are heated to above the critical temperature, and after proper heat preservation, the parts are quickly cooled to room temperature in water or oil, so that martensite transformation occurs. The hardness of the quenched NV F36 combination carrier steel increases sharply. Quenching is to prepare the organization for adjusting and improving the performance of NV F36 combination carrier steel during tempering, while tempering determines the performance and life of the workpiece.
Alloying agents like carbon and manganese along with steel lends a malleable nature to A572 structural high tensile steel plates, NV F36 combination carrier steel, letting them be formed into various structurals that adapt quickly to constantly evolving needs of an edifice, thereby being flexible to changes. High tensile steel plates facilitate an increased load bearing capacity; their lighter bodies handle the extra weight without giving in to pressures. Heavy lifting and moving vehicles built from them increase weight bearing capacity, reduce time and labour cost to increase profits.
After-sales service team is a key department to test the steel quality. Product quality is always the foundation of our survival and development. The company's full inspection from raw materials to finished products; and implements standardized, scientific, and strict internal quality control and management systems in accordance with the process flow during the production process; products can only leave the factory if qualified, and follow-up problem solving systems are implemented in after-sales services to guarantee the customers’ interest.
Leave a Message