HP295 is mainly used in the manufacture of liquefied gas cylinders, its CCS F36 marine grade ship steel sheet chemical composition is stable, P, S content is low, pure steel, the internal organization, fine grain. Moderate strength, good plasticity, low yield ratio, yield platform is not obvious, vertical and horizontal performance of small differences, excellent cold stamping performance.
Compared with carbon steel, low alloy steel has many advantages, such as high strength, good plasticity and toughness, good weldability, good cold and hot pressure processing performance, better corrosion resistance, etc. Due to the increase of CCS F36 marine grade ship steel sheet metal composition, the yield point of low alloy steel structure is higher than that of ordinary carbon steel, so it is light and suitable for structural parts application. The low alloy steel is one of our main products.
The main applications of normalizing are as follows:① For low carbon steel, CCS F36 marine grade ship steel sheet. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④ Normalizing can refine the cast structure and improve the machinability of steel castings.
Our products have perfect after-sales system to protect the interests of customers. At the same time, we can according to CCS F36 marine grade ship steel sheet customer's requirements, processing requirements, cutting technical requirements, etc., to develop detailed solutions for customers, so as to make customers 100% satisfied. If you have any requirements and needs, please contact us in time.
If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.
Leave a Message