Composition characteristics of normalized NV E32 hull steel plate product: (1) Low carbon: Due to high requirements for toughness, weldability and cold formability, its carbon content does not exceed 0.20%. 2) Add manganese-based alloying elements. 3) Adding auxiliary elements such as niobium, titanium or vanadium: a small amount of niobium, titanium or vanadium forms fine carbides or carbonitrides in the steel, which is beneficial to obtain fine ferrite grains and improve the strength and toughness of the steel.
The company's main business: ship plate, normalized NV E32 hull steel plate low alloy plate, automobile steel, high-strength plate, pipeline steel, boiler steel plate, weathering plate, wear-resistant plate, bridge plate, pressure vessel plate, steel plate, steel processing, etc. The company takes the implementation of high-end, normalized NV E32 hull steel plate high-quality, deep processing, strengthening the main business, diversified operation, group operation, enterprise transformation and upgrading as its development strategy, and makes all efforts to be your professional normalized NV E32 hull steel plate steel supplier and partner.
normalized NV E32 hull steel plate Weldability refers to the performance of the weld joint with the expected quality requirements obtained by common welding methods under specific structure and process conditions. Weldability is generally judged by the crack sensitivity and the change of mechanical properties of weld zone. The ability of steel materials to withstand bending without cracking at room temperature is called cold bending. The greater the bending capacity before crack, the better the cold bending performance of the steel material.
"The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube, normalized NV E32 hull steel plate tube.The extrusion method is to pierce the billet or ingot with a piercer, and then extrude it into a steel tube with an extruder. This method is less efficient than the cross rolling method and is suitable for the production of high-strength alloy steel tubes."
We have a professional after-sales service team, the company has developed a clear service process and service standards, after-sales service team members strictly perform after-sales procedures, comply with service standards. The most important thing is that we have set up the correct concept of after-sales service, "customer first, sincere service for users".
Leave a Message