ABS F32 offshore steel sheets sheet stockist in China

ABS F32 offshore steel sheets sheet stockist in China

SA516Gr60 material, SA516Gr70, SA516Gr60N, SA516Gr70N steel plate in thickness ≤1.5in (40mm) is usually supplied in rolled state. The plate can also be ordered according to normalizing or stress relief, or normalizing plus stress relief. SA516Gr60 steel plate when thickness> 1.5in. (40mm) should be normalized. Unless otherwise specified by the customer, ABS F32 offshore steel sheets, SA516Gr60 steel plate (thickness ≤40mm) should be normalized when there is a notch toughness requirement.

ABS F32 offshore steel sheets,After quenching and tempering, 40Cr alloy steel plate and sheet have good comprehensive mechanical properties, good low temperature impact toughness and low notch sensitivity. The hardenability of steel is good. It can be hardened to Ф28 ~ 60mm during water quenching and Ф15 ~ 40mm during oil quenching. In addition to quenching and tempering, this steel is also suitable for cyanidation and induction hardening. The cutting performance is better. When the hardness is HB174 ~ 229, the relative cutting workability is 60%. 40Cr alloy steel is suitable for making medium-sized plastic molds.

As the thickness and hardness of ABS F32 offshore steel sheets increase, the tendency to crack at the cutting edge increases. In order to prevent the from cutting cracks, preheating should be carried out before cutting. Special attention should be paid to preheating to make the entire interface evenly heated to avoid local overheating in the area contacting the heat source. If the whole cannot be preheated, the partial preheating method can be used instead,ABS F32 offshore steel sheets.

The alloy steel plate is among our business scope, and it is one of our main product. If you have any demands or questions about alloy steel plate, such as 34CrMo4 material properties, 42CrMo4 AISI equivalent, 12Cr1MoV equivalent ASTM, 40Cr material specification, 42CrMo hardness, 50CrMo4 chemical composition and so on, please free free to communicate with us. We have professional technical team and sales team, who will give you professional answers and quotation about alloy steel plate in time.
ABS F32 offshore steel sheets

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.

Leave a Message