The alloy steel plates RD 32 VSL vessel steel sheets are among our main steel products. There are various alloy steel grades on the market. The most popular alloy steel materials are European material under EN10083-3 and Chinese material under GBT3077 for round bars and GBT11251 for plates. Our typical alloy steel grades are 51CrV4, 25CrMo4, 34CrMo4, 42CrMo4, 12Cr1MoV, 20Cr, 40Cr, 15CrMo, 30CrMo, 35CrMo, 42CrMo, etc.
We are a popular factory, supplier and wholesaler of mild steel plates and alloy steel plates in all over the globe. We follow all standards and specifications of RD 32 VSL vessel steel sheets boiler steel plate, structural steel plate, shipbuilding steel plates and corten steel in different types. We manufacture and supply steel plates, steel section and steel structures according to customer’s demand. The company also focus on providing customers with RD 32 VSL vessel steel sheets high-end steels and competitive price.
At present, the cutting thickness limit of laser cutting is 20 mm. However, it should be noted that oxygen will be added into the laser beam to cut 20 mm thick RD 32 VSL vessel steel sheets steel plate, which will form a thin oxide film on the cutting surface, which may affect the cutting quality, Therefore, attention should be paid to this point to avoid problems.
After the steel plate is produced from the original factory, it will pass through a series of transportation and storage links and then be delivered to the processing workshop. During this period of time, the steel plate surface will contact with the air continuously, which will inevitably produce a layer of oxide skin. The oxide skin is a difficulty in the treatment process. It has high melting point, is not easy to burn and dissolve, increases preheating time, reduces cutting speed. Therefore, the surface of the RD 32 VSL vessel steel sheets plate should be derusted before cutting.
We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.
Leave a Message