API2HGr50 delivery status: steel is usually delivered in hot rolled or hot forged state. It can also be delivered in the state of heat treatment (annealing, normalizing or high temperature tempering). Annealing: The steel CCS F40 offshore platform steel plate is heated to a suitable temperature and slowly cooled according to the heating time of different materials and specifications. Normalizing: Heat the steel plate to a suitable temperature and cool it in the air. Tempering: Keep the steel plate at an appropriate temperature for a long time while keeping it cool.
In September, China's apparent consumption of crude steel was 94.38 million tons, an increase of 15.58 million tons or 19.8% year-on-year. It has exceeded 90 million tons for five consecutive months. From January to September, China's apparent crude steel consumption was 770 million tons, an increase of 63.14 million tons or 8.9% year-on-year. In terms of growth rate, the apparent consumption of hot-rolled sheet and coated sheet (strip) from January to September increased by more than 40% year-on-year, and the growth rates were 42.6% and 42.0% respectively; railway steel and electrical steel strips fell year-on-year, with a decline. They are 12.8% and 1.4% respectively.
First to determine the welding methods, such as hand arc welding, submerged arc welding and tungsten argon arc welding, melting polar gas shielded welding machine, and so on are very many different kinds of CCS F40 offshore platform steel plate welding method, can only be chosen according to specific situation, determine the welding method, and make welding process parameters, different kinds of welding process parameters, such as manual welding mainly includes: electrode model (or brand) diameter, current, voltage, welding power source type and polarity connection, welding layer number, number, inspection method, etc.
Many people will mix strip steel and steel plate together, which can usually be distinguished from the following points. First of all, the thickness of the steel plate is much thicker, and the thinner the strip steel is required, the better. Secondly, in appearance, the steel strip can be crimped and the steel plate is too thick to bend, even if it is bent, it is difficult to recover, because it is easy to break if it is bent too much. Thirdly, the strength of CCS F40 offshore platform steel plate, steel plate is higher than that of strip steel. The steel plate is suitable for construction engineering, while strip steel is only suitable for processing into hardware products.
Leave a Message