The main reference for structural design of steel structure engineering is the static and dynamic characteristics of the steel used under various actions, such as elasticity, plasticity, strength, toughness, fatigue and other mechanical properties. Therefore, the LR EH40 wash bulkhead steel and so on steel used in the construction of steel structure engineering will limit its strength, plasticity, impact toughness and weldability. Steel structure engineering requires high tensile strength and yield point of steel. High yield point can reduce the cross-section of the component, so as to reduce the weight, save steel and reduce the cost. High tensile strength can increase the safety of the structure.
Iron and steel goods, including pig iron, ingots, all kinds of steel and so on. Therefore, logistics companies are required to load evenly and evenly in the process of transportation, prevent moisture and prevent corrosion. It is necessary to prevent the LR EH40 wash bulkhead steel steel sheet from being mixed with water when transporting the steel; it is necessary to prevent the LR EH40 wash bulkhead steel steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when loading the LR EH40 wash bulkhead steel steel sheet on the truck Good luck.
BBNsteel LR EH40 wash bulkhead steel medium plate product discount: 17.5*2850*8450, 18.5*1940*12100, 18*2770*4000, 19.5*2980*12050, 20*3000*8570, 19.5*1970*4000, 18.5*1640*8450, 19.5*1490*8500, 19*2580*4700, 20*3200*9000, 20*1600*7740, 18.5*1850*14050, 19.5*1910*6300, 21*1630*6000, 22*1300*10000, 19*2640*7810, 21*2650*7500, 21*1920*8220, 22*1380*7650, 21*1920*9270, 20.5*1590*6000, 21*2980*6460.
After the steel plate is produced from the original factory, it will pass through a series of transportation and storage links and then be delivered to the processing workshop. During this period of time, the steel plate surface will contact with the air continuously, which will inevitably produce a layer of oxide skin. The oxide skin is a difficulty in the treatment process. It has high melting point, is not easy to burn and dissolve, increases preheating time, reduces cutting speed. Therefore, the surface of the LR EH40 wash bulkhead steel plate should be derusted before cutting.
Leave a Message