The company is based on the principle of good faith, small profits and quick sales, and keeps forging ahead. In the fierce market competition, with TM rolled GL-AH 32 higher strength steel good cooperation and sincere service spirit, we win the trust of our customers and develop rapidly. We will create a win-win situation with our customers and create a better future with the belief of pioneering, pursuing excellence and learning.
SA516 Gr65 sheet is a carbon steel plate for medium and low temperature pressure vessels. It implements the ASME standard of the American Standard. It can provide a minimum thickness of 8mm and a width of 1500~4000mm. The TM rolled GL-AH 32 higher strength steel product thickness direction (Z-direction) resistance to tearing and wet hydrogen sulfide corrosion can be added Performance (HIC+SSCC) steel. Steel used to manufacture pressure vessels for petrochemical, gas separation and gas storage and transportation equipment.
Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with TM rolled GL-AH 32 higher strength steel ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.
When phosphorus, copper, chromium, nickel and other trace elements are added to the weathering steel sheet, a dense and strong adhesion protective film will be formed on the steel surface, which will hinder the corrosion from spreading and developing inside, and protect the substrate under the rust layer, so as to slow down the corrosion rate. That is why the weathering steel sheet, TM rolled GL-AH 32 higher strength steel has good atmosphere corrosion resistance.
40Cr grade under GB/T 3077-2015 standard is a alloy steel bar material. TM rolled GL-AH 32 higher strength steel, 40Cr alloy chemical composition (C: 0.37 ~ 0.44, Si: 0.17 ~ 0.37, Mn: 0.50 ~ 0.80, Cr: 0.80 ~ 1.10, Ni: ≤0.30, P: ≤0.030, S: ≤0.030, Cu: ≤0.30, Mo: ≤0.10). Heat treatment: First quenching heating temperature (℃): 850; coolant: oil; Temperature heating temperature (℃): 520. 40Cr steel tensile strength (σb / MPa): ≥980. Yield point (σs / MPa): ≥785
For ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates, our company would issue the original mill test certificate TM rolled GL-AH 32 higher strength steel EN 10204 3.1 for clients when arrange delivery, so that clients can trace the A573 Gr.70 plates origin easily.
The company is deeply supported and loved by customers with its unique business philosophy and business model. The company has always been adhering to the "credibility first, integrity-based, quality first" purpose, and sincerely serve new and old customers. Over the past twenty years, the company has won the trust of customers by relying on good service and good reputation. Our aftersales team’s main responsibility is to deal with quality feedback and complaints from Customer.
Leave a Message