Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as ABS A40 hull steel material, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.
Marine steel is widely used in all kinds of ships and offshore platforms, but it also puts forward higher and higher requirements for marine steel. In general, the demand share of ABS A40 hull steel material high-strength marine steel continues to increase. In terms of strength requirements, with the change of ship's large-scale, safety and coating specifications, the general trend is that the consumption of ordinary strength grade A marine steel plate is gradually reduced, and the consumption of high-strength marine steel plates is increased.
The after-sales service personnel understand the user's ideas and needs in detail, and stand on the other side's position and interests. Actively communicate with users and help them solve practical problems. This not only solves the service problem, but also improves the customer's trust in the company.
In the first ten days of February 2020, the key statistics show that steel enterprises produce a total of 19.3943 million tons of crude steel, 17.9747 million tons of pig iron, 17.5904 million tons of steel and 3.225 million tons of coke. This ten day average daily output of ABS A40 hull steel material crude steel is 1939400 tons, down 2.68% on a month on month basis, up 3.16% on a year-on-year basis; steel is 1759000 tons, down 9.09% on a month on month basis, up 2.51% on a year-on-year basis.
Leave a Message