15CrMo alloy plate is a heat-resistant steel with pearlite structure, which has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain resistance to hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in steel, the hardening tendency of NV D40 hull steel material and 15CrMo alloy plate is obvious and the weldability is poor. After welding, local high temperature tempering treatment should be carried out. The heat treatment process of 15CrMo alloy plate is as follows: the temperature rise rate is 200°C/h, the temperature is raised to 715°C for 1 hour and 15 minutes, the temperature drop rate is 100°C/h, and the temperature is reduced to 300°C before air cooling.
40Cr steel belongs to alloy structural steel. NV D40 hull steel material, 40Cr steel has good comprehensive properties, low temperature impact toughness and low notch sensitivity after quenching and tempering on the basis of high-quality carbon structural steel No. 40. 40Cr steel mechanical properties: tensile strength: ≥ 980mpa, yield strength: ≥ 785MPa, elongation after fracture: ≥ 9%, elongation after fracture: ≥ 45%, impact absorption energy: ≥ 47J. 40Cr steel chemical composition: C: 0.37-0.44, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.80-1.10.
Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This NV D40 hull steel material rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.
The company always adheres to the quality policy of "Quality First, Continuous Improvement, Customer Satisfaction" and the business philosophy of "Continuous Progress, Pursuing Excellence", as always, we look forward to cooperating with you to create a new situation for common development.Steel products NV D40 hull steel material price concessions, rich industry experience, complete varieties.
Both parties shall confirm the NV D40 hull steel material material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the NV D40 hull steel material steel plant.
Leave a Message