In recent years, in line with the development trend of iron and steel industry at home and abroad, we have accelerated the transformation of development mode, promoted structural adjustment, and formed a rich product series of medium and thick plates, hot rolled steel coils, profiles, steel pipes, etc., which are widely used in automobiles, long-span bridges, railways, machinery, ocean and so on fields. Meanwhile, we also provide deep processing for the steel materials.
The heat treatment hardness of DC53 mold steel is higher than that of SKD11, normal strength RE flat bars, the high temperature is 520-530 ℃, and the high hardness can reach 62-63HRC after tempering. In terms of strength and wear resistance, mold steel DC53 exceeds SKD11 mold steel. The toughness is twice that of SKD11 die steel. The toughness of DC53 is more prominent in cold work die steel. Tools made with DC53 rarely crack and crack, greatly increasing the service life.
With the continuous development of foreign business, our company has achieved pleasant cooperation with a number of freight companies, including international air transport (including international express) and sea bulk cargo, we can provide the best service. In order to better develop the air transport from mainland to foreign countries, so that the goods can be transferred in Hong Kong in a timely manner.
Laser cutting has no burr, wrinkle and precision is high. It is superior to plasma cutting. Laser cutting has good cutting quality, narrow cutting width (generally 0.1-0.5m m), high accuracy (generally 0.1-0.4mm hole center distance error, 0.1-0.5mm contour dimension error), good surface roughness (generally Ra is 12.5-25μm), and the cutting seam can be welded without further processing. Fast cutting speed: for example, with 2kW laser power, the cutting speed of 8mm thick carbon steel is 1.6m/min.
"The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube.The extrusion method is to pierce the billet or ingot with a piercer, and then extrude it into a steel tube with an extruder. This method is less efficient than the cross rolling method and is suitable for the production of high-strength alloy steel tubes."normal strength RE flat bars
The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.
According to the new report o f the World Steel Association (worldsteel), the world crude steel production for the 64 countries has reached to1433 million tonnes (Mt) in February 2020, a 28% increase compared to February 2019 China’s crude steel production for February 2020 was 748 Mt, an increase of 50% compared to February 2019 India produced 96 Mt of crude steel in February 2020, up 15% on February 2019 Japan produced 79 Mt of crude steel in February 2020, up 22% on February 2019,normal strength RE flat bars.
Leave a Message