The company adheres to the management concept of "people-oriented, talent is concerned", develops business with the spirit of "believing strength, practical style, KE40 offshore steel sheet professional service and dare to compete", and provides customers with "professional, value-added and effective" service support. For the company's development and take-off, we work together to move forward and create a better KE40 offshore steel sheet tomorrow!
The grades specified in the GB712-2011 ship and marine engineering structural steel standard are: Grade A, B, D, E, AH32, DH32, EH32, FH32, AH36, DH36, EH36, FH36, AH40, DH40, EH40, FH40, AH420, KE40 offshore steel sheet, DH420, EH420, FH420, AH460, DH460, EH460, FH460, AH500, DH500, EH500, FH500, AH550, DH550, EH550, FH550, AH620, DH620, EH620, FH620, AH690, DH690, EH690, FH690.
Compared with KE40 offshore steel sheet, boiler steel plates should have the following properties: (1) High medium temperature strength: low and medium pressure boiler drums use steel with a lower yield point, high pressure boilers use steel with a high yield point. (2) Good plasticity, impact toughness, cold bending and welding performance. (3) The notch sensitivity is small, that is, the sensitivity to the stress concentration caused by the opening of the steel plate surface and the welding of the pipe head is small.
There is an inherent difference between the cold forming properties of low-alloy high-strength steel and carbon structural steel. First of all, a certain amount of permanent deformation of low-alloy high-strength steel requires greater force than KE40 offshore steel sheet, carbon structural steel of the same size. Second, when low-alloy high-strength steel is formed, a slightly larger allowable amount for springback should be given. According to experience, unless the low-alloy high-strength steel is processed to control the shape of inclusions, it is necessary to use a larger bending radius than carbon structural steel during cold forming.
The difference between KE40 offshore steel sheet, 10# seamless steel pipe and 20# seamless steel pipe: 1. Chemical composition Chemical composition of 10# seamless steel pipe: C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. Chemical composition of 20# seamless steel pipe: C: 0.07-0.23, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.25, Ni: 0.30, Cu: 0.25 2. Mechanical properties 10# seamless steel pipe: tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%. 20# seamless steel pipe: tensile strength: 410 MPa, yield strength: 245 MPa, elongation: 25%.
Our company will accept the product quality objection registration record, pass it to the KE40 offshore steel sheet production unit and relevant departments, and timely coordinate the supervision of product KE40 offshore steel sheet quality objection. Our company coordinates the relevant department personnel to the customer unit to carry on the investigation, the processing.
Leave a Message