As deepwater wells are drilled to greater depths, engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Offshore Structure Design, Construction and Maintenance covers all types of offshore structures KF36 offshore engineering steel and platforms employed worldwide.
Hot Rolled Plates KF36 offshore engineering steel MachiningAfter final forging/forming and Heat treatment process, all the pipe Fittings, Flanges, Fasteners, Etc. are sent for machining i.e. and preparation, O/D and I/D matching as per dimensional codes. An Expert Q.C. engineer is involved and he keeps constant vigil on every machining operation. Step machining is carried out as required by the codes. GO and NO-GO gauges are used to check the O/D & I/D of the fittings, Flanges, etc.
In March, the daily output of key iron and steel enterprises decreased on a month on month basis. In terms of enterprise inventory, in late March, the key statistics showed that the KF36 offshore engineering steel steel inventory of iron and steel enterprises was 18.067 million tons, a decrease of 3.342 million tons or 15.6% compared with the highest inventory in early March, and an increase of 8.534 million tons or 89.5% compared with the beginning of the year.
The main function of boron in KF36 offshore engineering steel and so on steel is to increase the hardenability of steel, so as to save other rare and precious metals, such as nickel, chromium and molybdenum. For this purpose, the boron content is generally regulated in the range of 0.001% - 0.005%. It can replace 1.6% nickel, 0.3% chromium or 0.2% molybdenum. It should be noted that molybdenum can prevent or reduce temper brittleness, while boron slightly promotes temper brittleness, so molybdenum can not be completely replaced by boron.
Leave a Message