30CrMnSiA steel is a grade of alloy structural steel. The steel has high strength and poor welding performance. It is a high-strength quenched and tempered structural steel with high strength and sufficient toughness after quenching and tempering, and good hardenability. It has good workability, small processing deformation and good fatigue resistance. 30CrMnSiA steel is mostly used to manufacture various important parts with high load and high speed.
BEBON cpompany practice new development concepts, expand in an all-round way, deepen reform and innovation, speed up transformation and upgrading, become stronger, better and bigger, accelerate the implementation of BEBON Steel's CCS A32 offshore steel material industrial planning, and realize the revitalization and development of enterprises.Fully implement the corporate CCS A32 offshore steel material market dominant position, comprehensively promote contractual management, and promote the transition from "internal production" to "market operation”.
Titanium microalloying is an element of CCS A32 offshore steel material strengthening complex with carbon and nitrogen. The addition of micro amount of titanium in the steel can fix almost all nitrogen and part carbon in the steel, so as to eliminate the strain aging phenomenon and improve the aging impact performance of the steel. At the same time, it can refine the grains and change the morphology of the compounds. According to the atomic weight ratio of Ti and N in CCS A32 offshore steel material tin formula (Ti = 3.4n), the content of Ti in steel should be controlled between 0.015 and 0.025%. Generally, the amount of ferrotitanium added to each ton of steel is 1kg.
Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as CCS A32 offshore steel material, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.
Our quality and service commitment: CCS A32 offshore steel material product quality problems, life-long replacement.In the process of using, any time if you find we supplied steel materials not conform to the requirements of technical standards, we can replace it for you free of charge. However, it should be noted that non product quality problems caused by improper use are not covered by the warranty. Please pay attention to the service time commitment as well as the product quality assurance commitment. Because only the products of big brands and reliable enterprises with complete after-sales service system can truly realize the long-term product quality assurance and the whole process of service.
Leave a Message