The cold rolling precision bright pipe system produced by our factory has smooth appearance, uniform wall thickness, no oxide layer and high precision. The inner hole of GL-FH 36 ocean engineering steel steel pipe can be divided into round, spline and plum blossom, which is widely used in automobile, motorcycle, electric power, petrochemical, ship, aerospace, bearing, pneumatic components, oil cylinder, boiler equipment, medical equipment, fitness equipment and other industries. Materials can be divided into: 10#, 20#, 35#, 45#, 40Cr, 16Mn, etc. According to the needs of users, we can make all kinds of national standard non-standard precision pipes. Special GL-FH 36 ocean engineering steel materials and specifications can be ordered in advance.
Carbon steel GL-FH 36 ocean engineering steel is an iron carbon alloy with carbon content less than 2.11% and a small amount of silicon, manganese, sulfur, phosphorus and other impurities. Carbon steel inevitably contains some impurity elements during smelting, which has a great influence on the performance and quality of steel, so it should be controlled. The quality of carbon steel is mainly measured by the content of sulfur and phosphorus. The lower the GL-FH 36 ocean engineering steel content of sulfur and phosphorus, the better the quality of carbon steel.
Unlike general steel manufactures, other than regular fresh production, we also have huge stocks. What is more, we offer cutting, welding, drilling, bending, etc. deep processing for the steel materials. That enable us to meets various GL-FH 36 ocean engineering steel steel sizes and shapes requirements of clients.So, if you have any steel demands, or steel processing needs, please do not hesitate to contact with us. We will try our best to make you stisfied.
Semi-endless rolling technology has three advantages: the GL-FH 36 ocean engineering steel product's limit thickness and limit width specification range has been significantly expanded. The thinnest thickness of SPHC steel has been expanded from 1.0 mm to 0.78 mm, and the limit specification product width has been expanded from 1100 mm to 1300 mm; The thinnest thickness of Q235B steel has been expanded from 1.2 mm to 1.0 mm, and the width range of the limit specification products has also been further expanded.
Q550C steel belongs to low alloy high strength steel. Chemical composition of Q550C steel: C ≤ 0.18, Si ≤ 0.60, Mn ≤ 2.0, P ≤ 0.030, S ≤ 0.030, Nb ≤ 0.11, V ≤ 0.12, Ti ≤ 0.20, Cr ≤ 0.80, Ni ≤ 0.80, Cu ≤ 0.80, N ≤ 0.015, Mo ≤ 0.30, B ≤ 0.004, Al ≤ 0.015. Mechanical properties of Q550C steel: yield strength ≥ 550 MPa, tensile strength 600-780 MPa, elongation after fracture ≥ 16%, impact energy ≥ 55J. GL-FH 36 ocean engineering steel, Q550C steel is mainly used for manufacturing various large-scale engineering structural components and construction machinery. Due to its high strength, Q550C steel can meet the requirements of large-scale and lightweight construction machinery.
Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel GL-FH 36 ocean engineering steel plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.
Leave a Message