Full size range LR DH40 deck house steel

Full size range LR DH40 deck house steel

The company now has LR DH40 deck house steel oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than LR DH40 deck house steel 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.

As we all know, steel pipes occupy more space in the process of transportation. If there is no good way of packing, the transportation cost for steel pipes will be a big expense. In view of this characteristic, our company is ingenious and adopts the nest package method to solve this problem perfectly. The premise of the nest package is that the diameters of the steel pipes are different, and the small diameter pipe is inserted in the large diameter pipe. This not only saves the volume, but also saves the transportation cost. It also reduces the loading and unloading workload by half, saves precious time, and enables customers to receive goods earlier.

The blanking of the structural steel plate is first to find 90 degrees, and then use a tape measure and a powder line to draw the cutting range. According to the thickness of the carbon steel plate plus the cutting allowance, drilling is required. For the deep processing of LR DH40 deck house steel structural steel sections or profiles: First use a square ruler or a curved ruler to find 90 degrees, and then use a square ruler or a ruler to cut the line and add the cutting margin to the hole.

The Indian customer purchased our A516 Gr 70 pressure vessel steel plates to make tanks. They have very strict requirement for raw materials quality. For the A516 Gr 70 pressure vessel steel plates, they asked for Normalizing, 0℃ impact, A578 UT test, PWHT and so on tests, our Q/C department witness the production process with the technician from the customer company together. Meanwhile, we arrange BV inspection to check the quantity, spray mark, stamp on the A516 Gr 70 pressure vessel steel plates, and so on.

NM450 steel plate thickness≦80mm. LR DH40 deck house steel, NM450 wear-resistant steel plates are used in engineering machinery, mining machinery, coal mining machinery, environmental protection machinery, metallurgical machinery, abrasive tools, bearings and other product parts.NM450 Cchemical composition: C≤0.35; Si≤0.70; Mn≤1.70; P≤0.025; S≤0.010; Cr≤1.10; Ni≤0.80; Ti≤0.050; Mo≤0.55; B: 0.0005-0.006; Al≥0.010. Mechanical properties: Tensile strength Rm / MPa ≧ 25; -20 ℃ impact energy absorption (longitudinal) KV2 / J ≧ 24Surface Brinell hardness HBW: 420-480

The LR DH40 deck house steel company has established the corporate values of being proud of innovation and winning, and successfully realized the management of corporate culture. In BBN, leaders are not controllers and supervisors, but earnest LR DH40 deck house steel teachers, coaches and enthusiastic friends, so that employees can have more democracy, more autonomy, independence and creativity, and the belief of winning.

Leave a Message