Over the years, the company has trained a number of professional sales talents, enriched the concept of various marketing and customer service, and strengthened the business strength of the company. Now the company's business CCS FH32 naval vessels steel department, marketing department and information department constitute the market development network; the finance department, personnel department, logistics department, shipping department, document department and CCS FH32 naval vessels steel after-sales service department constitute the service customer network.
CCS FH32 naval vessels steel, Q195 and Q235 belong to carbon structural steel, which are mainly used in buildings and engineering structures such as workshops, bridges, ships, etc. Of course, there are many differences between Q195 steel and Q235 steel. 1. Different components. The chemical composition of Q195 steel: C ≤ 0.12, Si ≤ 0.30, Mn ≤ 0.50, P ≤ 0.035, S ≤ 0.040. The chemical composition of Q235 steel: C ≤ 0.22, Si ≤ 0.35, Mn ≤ 1.40, P ≤ 0.045, S ≤ 0.050. 2. The prices of CCS FH32 naval vessels steel, Q235 steel is higher than that of Q195 steel. 3. The mechanical properties of Q195 and Q235 steel are different. The tensile strength of Q195 steel is ≥390 MPa, yield strength is ≥195 MPa, and the elongation is ≥ 30%. The tensile strength of Q235 steel is 490 MPa, yield strength is ≥235 MPa, and the elongation is 23%.
CCS FH32 naval vessels steel and so on steel structure engineering steel has good plasticity, which can make the structure have obvious deformation before being destroyed, so as to avoid brittle failure of structure. The good plasticity of steel can adjust the local peak stress to redistribute the stress, and improve the ductility of components, so as to improve the seismic capacity of the structure. The impact toughness of CCS FH32 naval vessels steel and so on steel structure engineering steel is good, which can improve the ability of resisting dynamic load and avoid the occurrence of cracks and brittle fracture.
Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This CCS FH32 naval vessels steel rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.
"A573 Grade 70 steel chemical composition(%)Carbon max. 0.28: Manganese: 0.85-1.20Phosphorus Max.: 0.03Sulfur Max.: 0.03Silicon: 0.15-0.40CCS FH32 naval vessels steel, A573 Grade 70 steel mechanical propertiesTensile strength min. MPa: 290Yield strength min. MPa: 485Elongation % min. in 200mm : 18Elongation % min. in 50mm : 21"
Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel CCS FH32 naval vessels steel plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.
Leave a Message