CCS FH40 hull frame steel, No.45 seamless pipe belongs to high strength medium carbon steel, with certain plasticity and toughness, high strength and good machinability. Good comprehensive mechanical properties can be obtained by quenching and tempering treatment. In addition, the hardenability of No.45 seamless pipe is poor, and the water quenching is easy to produce cracks. After quenching and tempering, the small and medium-sized parts can obtain better toughness and higher hardness. For large parts (the section size is more than 80mm), normalizing treatment is appropriate. But the weldability of No.45 steel is poor. The weldment should be preheated before welding and annealed after welding to eliminate welding stress.
We have full ranges of gas cylinder steels, not only GB standard gas cylinder steel, but also JIG standard and EN standard materials. Such as SG255, SG295, HP265, P245NB, etc. The MOQ is 200 tons. For the gas cylinder steel coil, we can do CCS FH40 hull frame steel further processing in our processing center and provide you gas cylinder steel plates. And we can punch steel discs for your convenient use.
Try to use CCS FH40 hull frame steel high-quality alkaline covered electrode as much as possible, and don't use inferior electrode to save money. According to the theory of chromium poor, chromium carbide will be precipitated on the upper edge of the grain boundary of the weld and heat affected zone when the CCS FH40 hull frame steel temperature range is between 450 ℃ and 850 ℃, resulting in chromium poor grain boundary, which is insufficient to resist corrosion.
Welcome to our company to purchase, our products are exported to all parts of the world every month, the quality is guaranteed, the CCS FH40 hull frame steel price is very preferential. Therefore, it has won great trust and praise from customers. Every month, it needs to purchase some steel plates, steel pipes and other major products. If you have any need, please contact us in time!
We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.
Leave a Message