Standing at a new historical starting point, we adapt to the requirements of supply side structural reform, adhere to the overall strategy of "innovation driven, quality leading, 150mm GL-FH 40 hull structural steel quality improving and efficiency increasing, transformation and development", and constantly improve the development concept and development level with a forward-looking vision and grand vision. Now we have been ranked the 150mm GL-FH 40 hull structural steel International leading steel materials supplier.
The difference between application of 20# steel and Q345 steel. 20# steel is mainly used for making parts, which can be heat treated; Q345 steel is mainly used for making engineering structural parts, which is usually not heat treated. Q345 steel does not emphasize the composition, but its yield strength must be above 345mpa. Because the composition 150mm GL-FH 40 hull structural steel is not fixed, Q345 steel is difficult to heat treatment (the temperature and time control of heat treatment are related to the composition, and different components use different processes).
40Cr steel belongs to alloy structural steel. 150mm GL-FH 40 hull structural steel, 40Cr steel has good comprehensive properties, low temperature impact toughness and low notch sensitivity after quenching and tempering on the basis of high-quality carbon structural steel No. 40. 40Cr steel mechanical properties: tensile strength: ≥ 980mpa, yield strength: ≥ 785MPa, elongation after fracture: ≥ 9%, elongation after fracture: ≥ 45%, impact absorption energy: ≥ 47J. 40Cr steel chemical composition: C: 0.37-0.44, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.80-1.10.
After a certain period of time, the steel products will reduce the toughness and increase the hardness, which is called aging effect. Generally, this effect is strongest at 200-300 ℃. The aging tendency of 150mm GL-FH 40 hull structural steel, low carbon steel (about 0.1% carbon content) is especially large, while high carbon steel and alloy steel containing molybdenum, barium or tungsten are not easy to produce aging. For boiler steel plate, it is required that the reduction rate of impact initial property is not more than 50%, or the absolute value of impact initial property is not less than 3-3.5KGM / cm2.
150mm GL-FH 40 hull structural steel 2020 stock in Tianjin: 7*2920*8200, 32*3000*7440, 14*2150*9300, 16*2200*10000, 12.5*2900*11000, 7*2920*8200, 14*1950*11000, 80*2200*10000, 16*2230*7650, 7*2920*8780, 32*2900*9700, 20*1950*9550, 10*2200*7200, 23.1*2590*7790, 20*1400*11400, 20*1950*9700, 7*2920*8780, 20.9*2851*7000, 25*1600*9300, 30*2200*9000, 14*1950*10550, 30*1600*8600.
We are specialized in offering hot rolled ASTM A516 steel plate, which are used in various engineering applications and can be availed in various grades like carbon steel 150mm GL-FH 40 hull structural steel A516 Grade 60 steel plate , A516 Grade 65 steel plate, A516 Grade 70 boiler steel plate, ASTM A516 GRADE 60 plates Trippled Certified, ASTM A516 GRADE 60 Plates Dual Certified. Our boiler plates are available in the form of steel plate, steel sheet, steel sections. If you are interested in 150mm GL-FH 40 hull structural steel boiler plate, welcome to contact us.
Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.
Leave a Message