S45C steel plate chemical composition: C 0.42~0.48, Si 0.15~0.35, Mn 0.60~0.90, P≤0.030, S≤0.035, Cu≤0.30, Ni≤0.20, Cr≤0.20Mechanical properties of 150mm GL-DH 36 TM rolled steel productTensile strength>686MPaYield strength>490MPaElongation δ5>17%Shrinkage ψ>45%Impact toughness value>78J/cm2The hardness is 201~269HB.
Based on the advantages of 150mm GL-DH 36 TM rolled steel steel resources in domestic market and good reputation, combining with the huge international market demand for steel products, our company started the international business in 2010 and successfully being approved and certified by ISO9001:2008, the Registration number is 626014Q11531R0S. With the quality steel 150mm GL-DH 36 TM rolled steel products and professional service, our company was award the international acclaim from infrastructure, shipbuilding, petroleum industry etc., and gradually grow into a bright star in the steel export industry .
Preheating cutting: The most effective way to prevent steel plate cutting cracks is to preheat before cutting. Before flame cutting, the steel plate is usually preheated, and the preheating temperature mainly depends on the quality level and thickness of the steel plate. The preheating method can be carried out with flame burner, electronic heating pad, or heating furnace. In order to determine the preheating effect of the steel plate, the required temperature should be tested at the heating point.
What is 150mm GL-DH 36 TM rolled steel, boiler steel consumption rate? The cost of the boiler, to a large extent, depends on the steel consumption of the boiler. The so-called boiler steel consumption rate refers to the tons of boiler steel used per 1t / h evaporation capacity of the boiler, also known as the boiler steel consumption per unit evaporation. The boiler steel consumption rate of boilers with different parameters, capacities and structures is different.
After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.
Leave a Message